Roller Shutters
Arkas Limited roller shutters are constructed of interlocking 75mm concave section galvanised steel lathes. Scrolls formed in the rolling process provide a continuous hinge effect for lateral strength. End locks are fitted as standard with additional wind locks fitted for high wind load areas.
Insulated Roller Shutter
- All mild steel construction unsprung barrel with safety brake and chain driven sprocket plate wheel
- Operated by 3 phase flange mounted motor
- Pre-wired with high level 5 pin plug
- High level engage manual override haul chain
- Complete with 95mm twin skin insulated lath curtain 24g steel with CFC free polystyrene infills, (lath curtain U value 1.1 w/m2k)
- Acoustic value of 24dba
- Rubber bottom seal & carrier
- 85mm deep guide channels with brush seals
- Low level push button up/down/stop/ actuation.
- Finish is galvanised with grey primer end plates.
- Manufactured and CE marked in accordance with BS EN 13241-1:2003
- EN 12453:2017, Power operated industrial, commercial and garage doors and gates – safety in use.
- EN 12604:2017, Industrial, commercial and garage doors and gates – mechanical aspects.
240V Tube Operator Roller Shutter
- All mild steel construction unsprung barrel with safety brake
- Operation by 240v tubular motor, with manual override facility and manual override handle.
- With 76mm solid concave lath curtain 22g
- ‘T’ section bottom rail
- 65mm deep guide channels
- Finish is galvanized with grey primer end plates.
- Manufactured and CE marked in accordance with BS EN 13241-1:2003.
- EN 12453:2017, Power operated industrial, commercial and garage doors and gates – safety in use.
- EN 12604:2017, Industrial, commercial and garage doors and gates – mechanical aspects.